DOWNLOAD PRODUCT BROCHURE
SMALL CHANGES MAKE A BIG DIFFERENCE
STAGE IV ENGINE FOR A BETTER ENVIRONMENT
HUDDIG 1260D is a good choice for the environment because is it equipped with a Stage IV emission compliant engine.
The DEF tank is positioned in the rear frame close to the diesel filling.
UPDATED OPERATOR CAB
- Improved wiper on the rear window
- Front wipers are positioned on the right side for a better view
- The new main display is placed on the B pillar
- The tool box is positioned behind the cab
NEW AFTERTREATMENT SYSTEM
The HUDDIG 1260D is equipped with a new exhaust aftertreatment system, which means that the exhaust and aftertreatment system have been moved out onto the right front fender and this provides an improved front visibility.
CONTROLS AND LEVERS IN THE RIGHT PLACE
A tilting main display has been moved up to the B pillar for better access and control. A mute button is easily accessible on the B pillar.
Cummins turbocharged diesel engine QSB6.7 Stage IV
116 kW (157 hp) at 1900 rpm
6,7 litres | 409 cu in
662 Nm | 488 lb ft at 800 – 1400 rpm
2-gear hydrostatic gearbox ZF/2HL 290.
Speed, 1st gear 0-10 km/hr low ratio l 0-6 mph low gear.
Speed, 2nd gear 0-42 km/hr high ratio l 0-26 mph high gear.
The transmission system is separated from the operating hydraulics.
Automatic differential brakes on both axles
Hub reduction of epicyclic gearing
Servo assisted disc brakes
Automatic engagement of transport brakes when stationary (automatic function can be disengaged)
Main Display Controls
Monitor / display
10’ TFT color touch screen
Hydrostatic orbitrol control system with dual cylinders in the center pivot
2x12V, 110 Ah
Starter motor output
Load sensing hydraulics with variable axial piston pumps, 60cc + 100cc l 6.10 (connected to a stepped-up pump distribution box providing a total of 174cc). Low pressure compressor valves for backfilling and a heating system (circuit pump system) for cold starts. Internal servo supply to directional valve and return power for excavating functions. The hydraulic system is prepared for environmentally compatible hydraulic oils.
23,3 MPa (233 bar) | 3380 psi
Nom. max. flow at 1 000 rpm
176 l/min | 46 gal/min
Nom. max. flow at 1 500 rpm
264 l/min | 70 gal/min
Nom. max. flow at 2 000 rpm
352 l/min | 93 gal/min
Measurements & Weight
2489-2600 mm | 98-102.3 in
Height to cab roof
3110 mm | 122.5 in
8630 mm | 329 in
Weight excluding buckets
12500 kg | 27557.8 lbs