Discover
.svg){kind=icon}
For those who want to drive the king
of excavator loaders
01.
Lifting height
Lifting height of over 4.3 meters
02.
Reach
Reach of 7.2 meters (incl. tiltrotator and G85 excavator bucket)
03.
slewing torque
51 kN
04.
LIFTING FORCE
24.4 kN
HUDDIG 1370 has a powerful Cummins 6.7 liter turbocharged diesel engine that can run on HVO. Add to that all of HUDDIG's superior features and you have a machine ready for any job.
Or how about an excavator unit with longer reach, increased slewing torque, higher load height, increased lifting power and a cab for an optimized working environment? You get all this, plus much more, in a HUDDIG 1370 - the king of conventional power.
01.
Longer, higher and stronger
With the HUDDIG 1370 you can reach further and higher. The excavator unit reaches a full 7.2 meters (incl. tiltrotator and excavator bucket G85), the lifting height is over 4.3 meters (4,370 mm) and the slewing torque is a full 51 kN.
02.
Optimal working environment
There is something very special about sitting in a HUDDIG. The logical and intuitive positioning of the controls, the comfortable and fully cushioned driver's seat and the 10" TFT color screen are just a few examples of how HUDDIG 1370 creates an optimal working environment.
03.
FlexLever™
With a third double-acting hydraulic outlet, it is possible to operate three hydraulic functions simultaneously. With this solution, combined with Huddig's proprietary hardware and software solution FlexLever™, you as a driver can customize the functions on the joystick buttons according to your own wishes.
Advantages of HUDDIG 1370
Lifting height
The lifting height of a HUDDIG 1370 is over 4.3 meters (4,370mm) which facilitates loading work.
Reach
The excavator unit as a reach of 7.2 meters (incl. tiltrotator and G85 excavator bucket).
Slewing torque
HUDDIG 1370 has a slewing torque of 51kN which makes planning easier.
Technical data
Engine
Diesel engine
Cummins Turbocharged Diesel Engine QSB 6.7 EU Stage V / EPA Tier 4 Final
Effect
Type
116 kW (157 hp) at 1900 r/min
Cylinder volume
Straight 6-cylinder
Torque
662 Nm at 800-1400 rpm
6.7 liters
Transmission
Drive system
Hydrostatic drive
Gearbox
Speeds 1st (low gear)
ZF/2HL 290 with 2 gears
Speeds 2nd (high gear)
0-10 km/h
Motorized equipment
ZF, automatic differential brake on both axles. Planetary gear type hub reduction.
axles
The system is separated from the working hydraulics
Class 1
0-42 km/h
Wheels
Standard
620/60x34
Braking system
Service brake
Servo-assisted multiple disk brakes
Excavator brake
Automatic application of the service brake at standstill (automatic can be disengaged)
Main displaycontrol system
Display screen
10" TFT color screen with touch function
Control system
Hydrostatic orbitrol system with double cylinders in the center
Steering angle
Rampendling
±32°
±8°
Electrical system
excitement
24 V
Batteries
generator effect
2 x 12 V, 110 Ah
starter motor effect
100 A, alternating current
5.8 kW
Hydraulic system
Load sensing hydraulics with variable axial piston pumps, 60cc + 100cc (connected to geared pump distribution box gives a total of 174cc). For backfilling, there is internal low pressure generation in the work valves as well as a heating system (circular pumping) for cold start. Internal servo supply in the work valves and power feedback on digging functions. The hydraulic system is prepared for environmentally friendly hydraulic oils.
Working pressure
Nom. max flow at 1300 rpm
2 x 12 V, 110 Ah
Nom. max flow at 2000 rpm
100 A, alternating current
5.8 kW
Dimensions & weight
Width
2 489 - 2 600 mm
Height to cabin roof
Length
3 110 mm
Weight excl. buckets
8 630 mm
12 500 kg
Dimensions
Dimensions standard equipment
With standard buckets and 600/60x34 wheel equipment.Theoretical dimensions, variations may occur.
A
transport length
b
c
Wheelbase
8 769 mm
2 600 mm
D
transport length excavator
Clearance height
Excavator overhang
1 100 mm
3 110 mm
E
F
G
I
Clearance angle outriggers
Outrigger width max
Outrigger width park. position
Outrigger width park. position
Width of front bucket
J
K
Width over wheels
r1
swing radius outside bucket
5 760 mm
swing radius outside wheel
r2
Excavator unit
6 764 mm
4 492 mm
Reach
Depth of excavation
Load height
Trench width
4 374 mm
4 390 mm
L
M
N
O
load aggregate
2 630 mm
Reach
3 500 mm
Lifting height of flat bucket
Loading height 45° tipped bucket
Reach 45° tipping angle
Max tipping angle
Load angle
Load angle in carrying position
Tilt angle ground plane
Shaft depth
46°
112°
90 mm
2 690 mm
1 030 mm
63°
40°
P
Q
R
S
T
U
U1
V
X
Lift
Height above basket in transport mode
Height above arm in folded position
Height above arm in transport position
3 950 - 4 080 mm
3 600 - 3 880 mm
3 840 - 4 010 mm
Y1
Y2
Y3
weight
13 200 kg
18 000 kg
Gross weight standard version incl. buckets
Gross weight max
H
Transport height excavator
4 525 mm
2 439 mm
515 mm
32°
3 700 mm
2 460 mm
2 460 mm
2 600 mm
2 600 mm
6 290 mm
Height above cabin
Equipment
Huddig offers different types of equipment and also a variety of options - all so that you can order the perfect machine based on your conditions and assignments. Here we have listed some of the equipment that you can get factory assembled. In addition, options and customizations are offered through our dealer, from tires to lighting, cabin details and color choices. They are real experts in the field and will help you customize and equip your machine exactly the way you want it
Lifts
Huddig's range of lifts has advanced hydraulics, enabling work that requires both power and precision. The working basket accommodates two people and offers a safe workplace at high altitudes while the short swing radius allows for smooth maneuvering of the lift. HUDDIG LIFT is certified according to the European standards for MEWPs EN 280. LIFT 2200 also has a proprietary arm system that provides stable working heights of up to 21.5 meters. LIFT 2200 is available in LWI design, which then meets the requirements for voltage work according to the bar method.
LIFT 1420B
Download the English product sheet
Download the Swedish product sheet
LIFT 2000B
Download the English product sheet
Download the Swedish product sheet
LIFT 2200 and LIFT2200 LWI
Download the English product sheet
Download the Swedish product sheet
Compare our models
Compare our models in English (metric)
Compare our models in English (imperial)
Remote control
Used to operate the machine outside the cab. Allows the operator greater mobility outside the machine.
Rail equipment
With railway wheels you can run your machine on rails.
Crane in loader
Work with a crane in loader from your HUDDIG, a flexible solution for terrain where conventional crane trucks cannot get through.
The key to freedom
Fast UC approvals, smooth handling with E-signing and flexible financing models for used machines - these are just some of the benefits of the new Huddig Finans. Whether you want to buy or lease your machine, we can offer financing at really good terms.
Part of the Huddig family
Huddig Finance is not like other finance companies, we are part of the Huddig family. Not only are our people experts in machinery finance, they also have extensive experience working with the construction industry and truly understand your business.
This means you can feel confident in discussing your machinery investments with us. Whether you want to buy, rent or lease machinery, we offer the right financing proposal tailored to your business - for both new and used HUDDIG. Choose between installment or leasing for your next machine financing.
In Sweden, Huddig Finans is operated by Nordea Finance.
You are welcome to contact your nearest Huddig Finance contact if you have any questions.
Catarina Lundin
Huddig Finance - Gothenburg
070-662 78 62
catarina.lundin@nordea.com
Carola Wallmark
Huddig Finance - Stockholm
070-345 11 28
carola.wallmark@nordea.com
Anna Nilsson
Huddig Finance - Växjö
070-245 03 70
anna.nilsson@nordea.com
Tobias Hedberg
Huddig Finance - Umeå
073-082 52 18
tobias.hedberg@nordea.com
Calculator
Calculate your monthly cost
*The calculator provides an example calculation based on the values entered. Contact us for a final calculation.
Right now we offer very favorable interest rates through Huddig Finance when you upgrade your fleet with a new HUDDIG 1370.
- Smooth handling with e-signature
- Quick UC request
- Reply within 24 hours (weekdays)
- Applies to both new and used machines
Installment payments
When it comes to financing construction machinery, there are several different options. In installment financing, the machine itself is the collateral. As with a bank loan, the machine is owned by the company and is eligible for tax depreciation. A bank loan often requires a lot of different types of collateral in the company. Instead of burdening the company with a large expense at the time of purchase, the cost is spread over several years.
Advantages of installment payments
- The company owns the machine This means that your company benefits from the net asset value of the investment and can depreciate it.
- No cost for security The machine provides the security sometimes together with additional security.
- Doesn't tie up capital Installment payments allow your company to use its capital in the business instead of locking it into an investment. The cost is spread over several years.
- Right to deduct input VAT Your company buys the machine and can deduct the input VAT on the investment as soon as the delivery has taken place.
- Right to early repayment and extra repayments Your company is not tied to the financing. The loan can be repaid early.
- Ongoing information on the outstanding debt Current outstanding debt is shown on the payment slip
Leasing
With lease financing, your business can more easily budget and plan costs over time. The machine is leased via the lessee, who owns it and holds it as security for the financing.
Benefits of leasing
- No strain on liquidity Instead of spending the whole amount immediately, payments and costs are spread over a longer period.
- The machine provides the security sometimes in combination with additional security.
- Budgeting and planning facilitation Lease rent is calculated using the annuity method, which means that, as long as interest rates remain unchanged, your company will pay the same amount at each payment date.
- The solvency is not affected Your company's key figures are preserved.
- Doesn't tie up capital Your business can use its capital in the business instead of locking it into an investment.
- Lease payments are tax deductible The investment is expensed with the lease payments.
- At the end of the leasing period, you can choose whether to continue leasing financing or to buy the machine at the residual value specified in the leasing contract.
- At the end of the lease period, you can choose whether to continue lease financing or to buy
the machine at the residual value specified in the lease.
Rental/Operational Leasing
Renting gives you the same benefits as leasing, but the difference comes at the end of the contract.
As a tenant, you can choose between the following options:
- Return the machine to the designated place under the applicable return conditions
- Indicate a buyer for the machine at the then current market value
- Extending the rental period by additional rental period after negotiation
What do I do with my existing machine?
It is now very common to trade in your existing machine when you finance a new one. Normally, the dealer will inspect your machine and give you a trade-in price.
In the case of installments, the trade-in price less any residual debt is entered in the financing calculation and used as a down payment.
In the case of leasing, you and the dealer settle the sale of the trade-in and the sum, less any residual debt, is used in the financing calculation as an initial increased rent.
Want to know what your machine is worth? Contact one of our dealer for further discussion.
We secure the future of your HUDDIG
Our machinery damage and electronics insurance is now included on all new machines. This means that your machine is covered for unforeseen damage from within, for five years or 5000 hours, whichever comes first.
The insurance in brief:
- The insurance is compulsory on all new Huddig machines, starting in 2024.
- The insurance can be taken out for machines ordered but not yet delivered from the factory.
- The insurance covers internal damage that is unforeseen and affects the functioning of the vehicle.
- The insurance is valid in Sweden and also covers factory-fitted equipment.
- Any damage is repaired with original parts by our authorized service provider.
Machinery and electronics insurance
The insurance applies to internal damage that is unforeseen and affects the functioning of the vehicle. Mechanical breakdown insurance covers critical components such as the engine, exhaust system, turbo/charging system, cooling system, gearbox, brakes, steering, hydraulics and more. Electronics insurance covers factory-installed safety and electronic systems, communication systems, electronic comfort functions, headlights, hybrid technology, i.e. fitted at the Huddig factory.
The insurance does not apply to vehicles equipped or used with components and/or software that deviate from the vehicle's serial design, such as trimming with components not approved by the general agent or manufacturer. It also does not cover damage caused by wear and tear, improper use, insufficient maintenance or improper repair measures, unapproved modifications, theft, fire, accidents, deliberate damage, transport-related events and damage by animals.
The excess stated in the insurance certificate applies to each claim.
The insurance covers the following components:
Terms and conditions
Supplier insurance for machinery and electronics damage applies to HUDDIG and the vehicle specified in the insurance certificate in Sweden. The insurance is valid for 5 years or 5000 working hours. The insurance applies to internal damage that is unforeseen and affects the functioning of the vehicle.
For full terms and conditions from Länsförsäkringar, download the following document.
Regulations
The terms of the insurance include specific regulations. The policyholder is requested to follow the manufacturer's specifications, proper maintenance and use of recommended oils and fuels. Maintenance service must be carried out by authorized service personnel and only the oils recommended by the manufacturer and the fuels approved by the manufacturer may be used. Service operations must be documented in a service book (or equivalent) and shown in the event of damage. If the regulations are not followed, the compensation in the event of damage may be reduced or not paid at all.
Valuation and remuneration rules
Compensation is paid up to the amount corresponding to the damage, valued using the CABAS calculation system and in accordance with the documented provisions of the terms and conditions of the insurance. The Company has the right to decide whether to repair the vehicle, to replace it with an equivalent vehicle or to pay the damage in cash.
Länsförsäkringar does not pay
a) the cost of improving or modifying the vehicle in connection with the repair of damage
(b) any depreciation after repair due to damage
c) additional cost due to overtime repair work or due to spare parts being transported by means other than the usual means of transport, unless the company has specifically approved the additional cost
(d) for VAT if the policyholder is subject to VAT accounting.
Towing/home transportation of vehicles
In the event of compensable mechanical and electronic damage, reasonable salvage costs from the site of the damage to a designated workshop are covered. Reasonable costs for repatriation after repairs are also covered. Compensation is only paid after the vehicle has been salvaged in connection with compensable damage.
Age deduction
Age deductions on replaced parts are made depending on the number of hours of use of the vehicle at the time of the damage or on the age of the vehicle. The table below shows the amount of the deduction as a percentage of the value of the parts. Please note that the policyholder's insurance certificate shows how many hours the insurance applies to.
Deductible
The excess stated in the insurance certificate applies to each claim.
Claims for damages
Damage must be reported immediately by the machine owner to Länsförsäkringar by telephone or e-mail.
Information on reporting and settling claims.
Full terms and conditions
Download the full insurance conditions.
Pictures
