The HUDDIG 1370 houses a powerful Cummins 6,7 litres turbocharged diesel engine which can run on HVO. Add all of HUDDIGs superior functions, and you’ll have a machine ready for any job.
How about a greater reach for the backhoe unit, increased slewing torque, higher loading height, increased lifting power, and an upgraded cab for an even better work environment?
This is the KING of conventional power – Discover the HUDDIG 1370.
With the new HUDDIG 1370, you reach both higher and longer. The new backhoe unit now reaches 7.2 meters which is 10 % further than its predecessor (incl. Tiltrotator and G85). The lift height is over 4.3 meters, and the slewing torque has an output of 51 kN (+ 40 percent from the previous model).
There is something special working in a HUDDIG – and the working environment just got even better. The new HUDDIG 1370 has an improved HVAC, a new digital display, and a new bar for mounting accessories – to name a few new features.
The third double-acting hydraulic outlet makes it possible to operate three hydraulic functions simultaneously. This upgrade, combined with a hard- and software solution developed by Huddig themselves, called FlexLever™, allows the operator to move the functions on the joystick’s buttons.
With our new HUDDIG 1370, we are consolidating our position as market leader by pushing the boundaries of what a construction machine can do. I am very proud of the expertise and commitment of our team, helping us to create the best loader excavator on the market.
Lars Lindahl
CEO Huddig AB
| Engine | ||||||||||||||||||||||||
| Diesel engine | Cummins turbocharged diesel engine QSB 6.7 EU Stage V/EPA Tier 4 Final | |||||||||||||||||||||||
| Power output | 116 kW (157 hp) at 1900 rpm | |||||||||||||||||||||||
| Type | Straight 6-cylinder | |||||||||||||||||||||||
| Cylinder capacity | 6.7 litres | |||||||||||||||||||||||
| Torque | 662 Nm at 800–1400 rpm | |||||||||||||||||||||||
| Transmission | ||||||||||||||||||||||||
| Drive system | Hydrostatic operation | |||||||||||||||||||||||
| Gearbox | ZF/2HL 290 Two ranges | |||||||||||||||||||||||
| Speeds 1st (low ratio) | 0-10 km/h | |||||||||||||||||||||||
| Speeds 2nd (high ratio) | 0-42 km/h | |||||||||||||||||||||||
| Motor vehicle | Class 1 | |||||||||||||||||||||||
| Axles |
ZF, automatic differential brake on both axles Planetary train type hub reduction |
|||||||||||||||||||||||
| The system is separate from the operating hydraulics | ||||||||||||||||||||||||
| Wheels | ||||||||||||||||||||||||
| Standard | 620/60x34 | |||||||||||||||||||||||
| Brake system | ||||||||||||||||||||||||
| Transport brakes | Servo assisted disc brakes | |||||||||||||||||||||||
| Service brake | Automatic engagement of transport brake when stationary (automatic function can be disengaged) | |||||||||||||||||||||||
| Main display, control system | ||||||||||||||||||||||||
| Monitor | 10" TFT colour touchscreen | |||||||||||||||||||||||
| Steering system | ||||||||||||||||||||||||
|
Hydrostatic Orbitrol control system with dual cylinders in the centre pivot |
||||||||||||||||||||||||
| Steering angle | ±32° | |||||||||||||||||||||||
| Frame oscillation | ±8° | |||||||||||||||||||||||
| Electrical system | ||||||||||||||||||||||||
| Voltage | 24 V | |||||||||||||||||||||||
| Batteries | 2 pcs 12 V, 110 Ah | |||||||||||||||||||||||
| Generator output | 100A, alternating current | |||||||||||||||||||||||
| Starter motor output | 5.8 kW | |||||||||||||||||||||||
| Hydraulic system | ||||||||||||||||||||||||
| Load-sensing hydraulics with variable axial piston pumps, 60cc + 100cc (connected to stepped-up pump distribution box providing a total of 174 cc). For refilling there is internal low-pressure generation in the operational valves and a heating system (circulation pumping) for cold starts. Internal servo-supply in the operational valves and power feedback for digging functions. The hydraulic system is prepared for environmentally compatible hydraulic fluids. |
|
|||||||||||||||||||||||
| Operating pressure | 24.5MPa (245 bar) | |||||||||||||||||||||||
| Nom. maximum flow at 1300 rpm | 176 l/min | |||||||||||||||||||||||
| Nom. maximum flow at 2000 rpm | 264 l/min | |||||||||||||||||||||||
| Dimensions & weight | ||||||||||||||||||||||||
| Width | 2489 - 2600 mm | |||||||||||||||||||||||
| Height to cab roof | 3110 mm | |||||||||||||||||||||||
| Length | 8630 mm | |||||||||||||||||||||||
| Weight excl. buckets | 12,500 kg | |||||||||||||||||||||||
|
Dimensions - standard equipment with standard buckets and 600/60x34 wheel fittings. Theoretical measurements, variations may occur. |
||||||||||||||||
| A | Transport length | 8769 mm | ||||||||||||||
| B | Wheelbase | 2600 mm | ||||||||||||||
| C | Backhoe overhang | 1100 mm | ||||||||||||||
| D | Height above cab | 3110 mm | ||||||||||||||
| E | Transport height, backhoe | 4525 mm | ||||||||||||||
| F | Transport length, backhoe | 2439 mm | ||||||||||||||
| G | Ground clearance | 515 mm | ||||||||||||||
| H | Ground clearance angle, support legs | 32° | ||||||||||||||
| I |
Width support legs max. Width support legs parked position |
3700 mm 2460 mm |
||||||||||||||
| J | Width front bucket | 2600 mm | ||||||||||||||
| K | Width across wheels | 2600 mm | ||||||||||||||
| r1 | Slew radius outside of bucket | 6290 mm | ||||||||||||||
| r2 | Slew radius, outside of wheels | 5760 mm | ||||||||||||||
| Backhoe unit | ||||||||||||||||
| L | Reach | 6764 mm | ||||||||||||||
| M | Depth | 4492 mm | ||||||||||||||
| N | Load height | 4374 mm | ||||||||||||||
| O | Digging width | 4390 mm | ||||||||||||||
| Load unit | ||||||||||||||||
| P | Reach | 2630 mm | ||||||||||||||
| Q | Lifting height, grading bucket | 3500 mm | ||||||||||||||
| R | Load height 45° tilted bucket | 2690 mm | ||||||||||||||
| S | Reach, 45° tilt angle | 1030 mm | ||||||||||||||
| T | Max. tilt angle | 63° | ||||||||||||||
| U | Load angle | 40° | ||||||||||||||
| U1 | Load angle in carrying position | 46° | ||||||||||||||
| V | Tipping angle, ground level | 112° | ||||||||||||||
| X | Excavation depth | 90 mm | ||||||||||||||
| Lift | ||||||||||||||||
| Y1 | Height to top of working platform in transport position | 3950 - 4080 mm | ||||||||||||||
| Y2 | Height to top of arm in folded down position | 3600 - 3880 mm | ||||||||||||||
| Y3 | Height to top of arm in transport position | 3840 - 4010 mm | ||||||||||||||
| Weight | ||||||||||||||||
| Gross weight, standard version incl. buckets | 13,200 kg | |||||||||||||||
| Gross weight, max | 18,000 kg | |||||||||||||||
